Full protection is just that. There is no telling if a receptacle is wired
correctly and/or there is no ground pin used. Full protection will attempt
to provide at least one MOV across the potential.
Rick

al smith wrote:

> In most cases, I've seen MOV's just line to line
>
> But in doing some research, I've also seen in mentioned that for full
> protection, you want to place a MOV from hot to neutral/return (line to
> line), hot to chassis gnd and return/neutral to chassis gnd
>
> Any comments?
>
> ______________

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu