I thought I'd post a link here because I figure you guys would appreciate
it.

At the request of a friend, I've created an intercooler monitor that
displays inlet/outlet temps of the intercooler on a VFD. I also added peak
temp display as an afterthought.

I created a video of it in operation:

http://home.comcast.net/~tekphobia/vfdfinal1.avi (2.6MB)

There's a smaller video I did that shows the opening screen, plus the
initial layout:

http://home.comcast.net/~tekphobia/vfdfinal.avi (363KB)

And the very latest finished project:

http://home.comcast.net/~tekphobia/vfdfinal2.avi (1.1MB)

Pictures can be found here:

http://forums.club4ag.com/topic.asp?TOPIC_ID=56501


This is what sparked the "AN566 Clarifcation" thread. I have two buttons on
RB7/RB6 for brightness/peak reset. I was using interrupts to catch them, but
now I just check the pin status in the main loop; it's fast enough!

I've posted this to some forums I frequent and get lots of wow's, but you
guys are harder to impress =)

-Tim

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.