>Harold Hallikainen wrote:
>
>>  I've now got the AC162053 header and have it connected to
>the ICD-2.
>> I now get the ICD messages below.
>>
>> Any idea what I'm doing wrong?
>>
>> THANKS!
>>
>> Harold
>>
>>
>>
>> MPLAB ICD 2 Ready
>> Connecting to MPLAB ICD 2
>> ...Connected
>> Setting Vdd source to target
>> Target Device PIC16F628A found, revision = 0x2
>> ...Reading ICD Product ID
>> Running ICD Self Test
>> ...Passed
>> MPLAB ICD 2 Ready
>> Programming Target...
>> ...Erasing Part
>> ...Programming Program Memory (0x0 - 0xCF)
>> ...Loading DebugExecutive
>> ...Programming Debug Vector
>> Verifying...
>> ...Program Memory
>> ...Debug Executive
>> ...Debug Vector
>> ...Verify Succeeded
>> Programming Configuration Bits
>> .. Config Memory
>> Verifying configuration memory...
>> ...Verify Succeeded
>> Connecting to debug executive
>> Entering Debug Mode
>> ...Programming GOTO 0x00 command
>> ICD0083: Target not in debug mode, unable to perform operation MPLAB
>> ICD 2 Ready

>-----Original Message-----
>From: Bob Axtell [mailto:cr_axtell@YAHOO.COM]
>
>Harold, MY f628A's won't work with my little round debug tool
>either.. because the F628A has no internal debugging hardware.
>Check the datasheet.
>
>The ICD2 will PROGRAM the F628A just fine.. It just can't
>DEBUG the F628A. Sorry.

It *can* be used to debug the 628A if you use the header which Harold has.
At least Microchip say it can ;o)

Regards

Mike





=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================
Any questions about Bookham's E-Mail service should be directed to
postmaster@bookham.com.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.