Hey Tony
I assembled the code and it works great and now its in the c54.
Thanks Again for your help
Michael Johnston
----- Original Message -----
From: "Tony Nixon" <Tony.Nixon@ENG.MONASH.EDU.AU>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Monday, January 12, 2004 6:28 PM
Subject: Re: [PIC:] 16c54 scanner


> Hi Michael,
>
> See new attached code.
>
> Assemble it in MPLAB and add the variabled PB_A and PB_B to the watch
> window in binary format.
>
> Comment out the delay_write subroutine calls like this...
>
>         call delay_write
>
> to...
>
>         ; call delay_write
>
> Now assemble and step through the code to see how it works.
>
> When happy, un comment the delay_write subroutine calls and program a
> chip to test.
>
> regards
>
> Tony
>
> Michael Johnston wrote:
>
> >Tony
> >    Here is my code you asked for. My delay was adapted from some code on
> >the pic list archive.
> >thanks
> >Mike Johnston
> >----- Original Message -----
> >From: "Tony Nixon" <Tony.Nixon@ENG.MONASH.EDU.AU>
> >To: <PICLIST@MITVMA.MIT.EDU>
> >Sent: Sunday, January 11, 2004 10:07 PM
> >Subject: Re: [PIC:] 16c54 scanner
> >
> >
> >
>
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>
>


----------------------------------------------------------------------------
----


>
;***************************************************************************
******************
>         LIST    p=16c54c
>         include "p16c5x.inc"
>         radix   hex
>
;***************************************************************************
******************
>         cblock  0x08
>         D1
>         D2
>         C1
>         PB_A
>         PB_B
>         endc
> ;
> same    equ     0x01
>
;***************************************************************************
*******************
>         org     0x000
>
;***************************************************************************
*******************
> start
>         movlw   0x00
>         movwf   PORTA   ;porta all bits low
>         tris    PORTA   ;porta  all pins output
>         movlw   0x00
>         movwf   PORTB   ;portb  all bits low
>         tris    PORTB   ;aportb all pins output
>
>         movlw b'00000001'
>         movwf PB_A      ; used for PORTA LED on, RA0 = 0N to start
>         clrf PB_B       ; used for PORTB LED on, all OFF to start
>
>
;***************************************************************************
******************
> ; Port A,b Forward
>
;***************************************************************************
*****************
> A_Left
>         call delay_write        ; write to port and delay to see it
>
>         bcf STATUS,C    ; shift LED bit left once
>         rlf PB_A,same
>         btfss PB_A,4    ; if PB_A bit 4 = 1, scan moves into PB_B
>         goto A_Left         ; not 1
>
>         clrf PB_A               ; clear bits in PB_A
>         movlw b'00000001'       ; set LED ON in PORTB 0
>         movwf PB_B
>
> B_Left
>         call delay_write        ; write to port and delay to see it
>         bcf STATUS,C    ; shift LED bit left once
>         rlf PB_B,same
>         btfss STATUS,C  ; PB_B = 0 and carry = 1 if all done
>         goto B_Left
>
>         movlw b'01000000'       ; start portB moving right
>         movwf PB_B
>
> B_Right
>         call delay_write        ; write to port and delay to see it
>         bcf STATUS,C    ; shift LED bit right once
>         rrf PB_B,same
>         btfss STATUS,C  ; PB_B = 0 and carry = 1 if all done
>         goto B_Right
>
>         movlw b'00001000'       ; set LED ON in PORTA 3
>         movwf PB_A      ; PB_B = 0
>
> A_Right
>         call delay_write        ; write to port and delay to see it
>         bcf STATUS,C    ; shift LED bit right once
>         rrf PB_A,same
>         btfss STATUS,C  ; PB_A = 0 and carry = 1 is all done
>         goto A_Right
>
>         movlw b'00000001'       ; start port A moving left again
>         movwf PB_A
>         goto A_Left
>
>
;***************************************************************************
*******************
> delay_write
>         movf PB_A,W     ; set port A and B LED
>         movwf PORTA
>         movf PB_B,W
>         movwf PORTB
>
>           movlw   0x7f        ; delay
>           movwf   D1
>           clrf    D2
> delay_0
>           decfsz  D1,f
>           goto    $-1
>           decfsz  D2,f
>           goto    delay_0
>           retlw   0x00
>
>
>
>
;***************************************************************************
*******************
>         end
>
>
>
>
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics