Check digi-key part number OR690CT-ND, Low profile SMT ZIF 0.5mm-pitch
slide lock.

Tom


> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Herbert Graf
> Sent: Thursday, January 15, 2004 1:15 PM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: [EE]: Looking for a connector
>
>
>         I was wondering if anybody would be able to point me
> to a connector that would allow me to play with this goody:
>
http://sales.goldmine-elec.com/prodinfo.asp?prodid=8258

It says it has a 22 pin flex cable with 0.5mm spacing. I've thought
about soldering directly to the flex cable but would much prefer a less
risky solution. I've tried to search my normal sources but I've having
trouble getting around the search engines, I can't seem to come up with
the right search term. Through whole would be ideal but surface mount
would be acceptable.

Thanks for any help. TTYL

----------------------------------
Herbert's PIC Stuff:
http://repatch.dyndns.org:8383/pic_stuff/

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us! email
listserv@mitvma.mit.edu with SET PICList DIGEST in the body

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body