At 06:43 PM 1/14/2004 -0800, you wrote:
>If you look at some cap types, they can go from -20% to 200%.  For
>bypass caps, usually the more uF the better!  Look at Z5U or XR7 for
>examples.
>
>.1uf  Panasonic mylar or poly are usually good.  Look at Digikey?
>
>Probably not in surface mount!

PPS is the dielectric of choice for SMT film. A bit costly, unfortunately.

http://www.maco.panasonic.co.jp/www-data/pdf/ABD0000/ABD0000CE13.pdf

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.