Last time I checked they do NOT have a translator.

Roy J. Gromlich
----- Original Message -----
From: "Eisermann, Phil [Ridg/CO]" <peiserma@RIDGID.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Wednesday, January 14, 2004 5:45 PM
Subject: Re: ] Mentor Graphics PADS 2003 PCB Software


> pic microcontroller discussion list wrote:
> > Part of this
> > is because I am not sending the footprints to the PADS Software in
> > the proper format.
>
> heh, you expect it to work using the wrong format? Or do you
> mean something else besides the netlist format?
>
> I use PADS, but with ViewDraw. If Orcad doesn't have a specific
> option to export it into PADS format, then have you looked
> for a translator? I would check Mentor Graphics website, they
> probably have one available.
>
> Phil Eisermann
> Electronics Engineer
> The Ridge Tool Company
> (440)329-4680
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.