Tony Nixon wrote:
> Has anyone had trouble following the fuse programming algorithm for
> the 18F1320 in the DS39592B docs.
>
> It states to do a GOTO 0x100000 before programming the fuses.
>
> If I execute these instructions the fuses won't program at all.
>
> You also now have to program fuses 1 to 5, then skip fuse 6, program
> fuse 7, then go back to program fuse 6. What a pain.

I don't remember anything that messy when adding 18F1320 support to my
programmer.  If you're desparate, you can rummange thru my source code to
see what it does.  Go to http://www.embedinc.com/easyprog/sw.htm and
download the development software.  I've programmed a bunch of 18F1320 with
this software without any problems.


*****************************************************************
Embed Inc, embedded system specialists in Littleton Massachusetts
(978) 742-9014, http://www.embedinc.com

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.