It's PIC C Compiler from CCS, www.ccsinfo.com

I don't know Hitech but i don't think it's very difficult to port to
Hitech.

#byte command are used to "rename" a Register.

SamB

-----Message d'origine-----
De : pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU]
De la part de Eisermann, Phil [Ridg/CO]
Envoy=E9 : mercredi 14 janvier 2004 22:07
=C0 : PICLIST@MITVMA.MIT.EDU
Objet : [PIC]: which compiler is this?


Hi all,

        I just inherited a program for a 16F73 written with a compiler.
I use HiTech, and this isn't it. I need to buy this compiler ASAP rather
than porting to HiTech, so here's lots of code copied out of the
program:

    setup_timer_2( T2_DIV_BY_4, TIMER2_RELOAD, 1 );
    set_pwm1_duty( 60 );
    setup_ccp1( CCP_PWM );

Interrupts are setup like this:

        #int_timer2
        void timer2Isr(void) {...}

And this looks potentially helpful in identifying the compiler:

//           'V'    3     2     0
#pragma id 0x56, 0x33, 0x32, 0x30
#pragma fuses XT, WDT, PROTECT, PUT, BROWNOUT

#pragma use fast_io( A )
#pragma use fast_io( B )
#pragma use fast_io( C )

and finally:
// locate some rarely used vars in upper segment to free ram for
compiler vars #reserve 0xA0, 0xA1
#byte minPosition   =3D 0xA0
#byte refPosition   =3D 0xB2
#reserve 0x30, 0x31
#byte position      =3D 0x30

#reserve 0xB6, 0xB7, 0xB8
#byte startKeyCnt   =3D 0xB6
#byte boltWatchCnt  =3D 0xB7
#byte handSwitchCnt =3D 0xB8


Any help greatly appreciated!


Phil Eisermann
Electronics Engineer
The Ridge Tool Company
(440)329-4680


--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.