On Wed, Jan 14, 2004 at 04:17:07PM -0000, Brian Clewer wrote:
> BAJ wrote:
>
> > One change. The LVP pin is RB5 on 18F chips whereas it's RB4 on 16F.
> > A good idea is to ground both pins through a 10k resistor to ensure that
> > the pin stays grounded during the programming operation.
>
>
> Very good point - but I think you meant RB3 on the 16F parts ;-)

Actually the 18 pin parts like the 16F628 use RB4, the 28 and 40 pin 16F parts
like the 16F877 uses RB3, and the 18F parts uses RB5.

A maze I tell you. A maze.

BAJ

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.