Thank you  - that crossed my mind as I have read those parts, I just don't
remember the exact ins & outs. Suffice it to say that I will be checking
that exact issue in the very near future - as soon as I get home and can use
my scope (which IS working).

Roy J. Gromlich

----- Original Message -----
From: "Jan-Erik Soderholm XA (TN/PAC)" <jan-erik.xa.soderholm@ERICSSON.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Tuesday, January 13, 2004 4:25 PM
Subject: Re: [PIC]: I hope I am missing something here


> Roy J. Gromlich wrote :
>
> >         TimerLO    equ    0x030
> >         TimerMD    equ    0x031
> >         TimerHI    equ    0x032
> >
> > While moving things around in memory I discovered (as far as
> > I can see) that putting the three TimerLO/MD/HI variables
> > anywhere above the 1st page 0x130...0x530 causes the time
> > delay to increase MARKEDLY - like 10X.  My scope just died so
> > I can't even continue checking this.
> >
>
>
>
> You do handle the "access bit" ("a" in most instructions)
> correctly ? Se picture 4-7 on page 44 in data sheet DS39564B.
>
> See also "Access Bank" on page 49.
>
> You don't specificaly say that you *have* read this parts,
> and from your questions it sounds as if you havn't... :-)
>
> Tell us more, it might be something else !
>
> Jan-Erik.
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics