>
>I had great luck with it under PIC16F876 SPI. But it has a poorly
>documented flaw- if you drive the crystal input from an external clock,
>you will be required to limit the current into that pin. The MAX3110 was
>missing characters because the crystal was being overdriven. I believe I
>had to insert a 220-ohm resistor to settle it down. If I recall, using
>your own crystal seemed to be OK.

For once, I lucked out.
I used a master osc, but I put series resistance in the clock feeds to limit EMI.

It's nice to know that not ALL the rocks land on your head. :)

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads