Michael Johnston wrote:

>Hi guys
>  I wrote a program that i adaptive with help from a friend to flash 12 leds tied to  the 12 I/O Pins on c54. I have four routines that rotate the bit pattern through porta and portb forwards and backwards.  My problem is that when the routine is going from porta to portb forward ra3 flashes so fast and jumps to portb bit0 so fast you can not see this happening. It also does this when going backwards from portb to porta. But it portb bit 7 that you dont see flashing. My friend told me the reason this was happening was because of the part i am using so i ported it to F84 and the program did the same thing in this port. I need so type of a delay but everything i try seems to mess my code up.
>Thanks
>Mike Johnston
>
>--
>http://www.piclist.com hint: To leave the PICList
>mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>
Can you post the code so we can PIC through it :-)

regards

Tony

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu