Well Thanks for replying We will wait for a few days to see how is the respond :) ----- Original Message ----- From: "William Chops Westfield" To: Sent: Sunday, January 11, 2004 8:48 AM Subject: Re: [PIC]: Any one interested in developing a Open Source stamp clone using 16F87X > On Saturday, Jan 10, 2004, at 09:58 US/Pacific, PSL wrote: > > > any one want to develop a basic stamp clone > > I brought this up a while ago, pointing out that with the > modern PICs like the 16f648, you could fit a whole stamp-1 > equivalent on the PIC itself, probably without having to > do any tight coding... > > There wasn't much interest. With the advent if ICSP, ICD, > and reasonably priced compilers, and cheap programmers, > the barrier between would-be stamp users and would be > bare-PIC users is considerably lower than it used to be, > and anyone willing to deal with bare chips is already > too close to being over that barrier... > > BillW > > -- > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > email listserv@mitvma.mit.edu with SET PICList DIGEST in the body -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu