I haven't tried it, but I think it is just implemented as an interrupt:

enable_interrupts(INT_LOWVOLT);

#INT_LOWVOLT
void
lowvolt_isr (void)
{
...
}

You would have to set the LDVCON bits 3-0 directly.

Bruce Partridge
http://www.rebreather.ca

> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Brian Clewer
> Sent: Friday, January 09, 2004 1:45 AM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: [PIC]:Low Voltage detect
>
>
> Hi all,
> Has anyone implemented the low voltage detect feature on the PIC 18F parts
> using the CCS compiler?  As far as I can see, there are no instructions in
> the CCS manual for this.
>
> Brian.
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.558 / Virus Database: 350 - Release Date: 1/2/2004
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.558 / Virus Database: 350 - Release Date: 1/2/2004

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.