You know what, as obvious as that is, I think thats
it...

Thanks,

--Nick


--- Jinx <joecolquitt@CLEAR.NET.NZ> wrote:
> > I unmask the USART receive peripheral interrupt
> (bsf
> >   PIE1, RCIE),
>
> init    ;(setup port A/B I/O, set baud rate to
> 2400bps,
>          ;enable async USART transmit, initialize
> LCD)
>
>         bsf     PIE1, RCIE              ;unmask
> USART receive interrupt
>
> If you aren't changing to Bank1, then you're setting
> bit5 in PIR1
> (address 0c), not bit5 in PIE1 (address 8c)
>
> --
> http://www.piclist.com hint: The PICList is archived
> three different
> ways.  See http://www.piclist.com/#archives for
details.


__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.