Hello

Anybody used the smartec smths10 for humidity measurement? I'm having
problem calibrating the sensor on a circuit that i have built. The circuit
is built off the schematics in the smths10 datasheet. The problem is that
the output varies between GND and Vcc thou it should be between GND and
0.5*Vcc, and it doesn=B4t seem to be linear neither. What could I have done
wrong. Maybe the sensor is damaged?! The circuit is quite simple so I
don't think I've miss wired it.  Any help, comments is appreciated.

Regards
Johan Baarman

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads