>-----Original Message-----
>From: Ben Jackson [mailto:ben@BEN.COM]
>Sent: 07 January 2004 13:14
>To: PICLIST@MITVMA.MIT.EDU
>Subject: Beware MPLAB 6.40
>
>
>[Sorry if this has come up before -- I haven't been reading
>the digest very carefully]
>
>I thought I wanted to play with some of the C language
>compilers and at least one suggested upgrading to the latest
>MPLAB.  I got 6.40 (to replace 6.12, I think) and installed it.
>
>It wouldn't load any of my old project files which were on a
>network drive.  It doesn't give an error, it just doesn't do
>much of anything when you try 'open project'.
>

Note that MPLAB must have write access to the project and workspace files in
order to open them.  This is a major PITA if the projects files are under
source control and are made read only when checked in.

Mike




=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================
Any questions about Bookham's E-Mail service should be directed to
postmaster@bookham.com.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads