> Hopkins <PICLIST@mitvma.mit.edu> wrote:
>
> > 1 cycle shown in the section 29 instruction set of the Mid Range
> > Reference manual


And to make it even worse, in table 29-1 on page
29-3 in the same manual, there is a "note 3" that says
that "If the PCL is modified, the instruction takes 2 cycles".
*But* note 3 is only marked on the 4 skip instructions,
even if it is actualy valid for *any* instruction that
*could* modify the PCL...

Jan-Erik.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu