Oic

anyway is there any restriection in where this instruction can be use in
creating a jump table.
I know one of it is that the jump table should be with in 256 bytes(0x0000
to 0x0100) as by doing ADDWF PCL,F
 we are doing a change at a max of 256.
i try the table on 0x0200 it does not work(16f876)
can any one enlighten me why?


thanks
----- Original Message -----
From: "Jan-Erik Soderholm XA (TN/PAC)" <jan-erik.xa.soderholm@ERICSSON.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Wednesday, January 07, 2004 2:03 AM
Subject: Re: [PIC]: ADDWF PCL,F


> PSL wrote :
> > how many cycle does
> >   ADDWF PCL,F
> > takes? is it 2 cycles like goto or is it 1 cycle?
>
>
> *Any* instruction that modifies
> the PCL takes 2 cycles, what ever the
> data sheet says...
>
> Jan-Erik.
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu