Am allowed 2 I comes frm Devon we all talks luverly down there !
(now in Bristol acents worserer ere!)
Stev

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Jinx
Sent: 02 January 2004 22:10
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [PIC]: FSR and page boundry help needed (please)

> Its an '877 and me text block starts at 0800h
> It's a big bunch of ascii for a display but I got loads a messages
> and about half way throu msg 34 (address 08ff) it jumps to the
> wrong place middle of some previous message (PCL should
> be 256 for the computed jump) but I aint sure where bit 9 of the
> pointer is
> Steve..

Aw, don't 'e talk luvverly [thanks for reminding me what I'm missing
while Eastenders is off for a week ;-) ]

Try indexing as per AN556, which is to increment and test PCL
before doing the call. If there's a rollover in PCL then increment
PCLATH

http://www.microchip.com/download/appnote/pic16/00556e.pdf

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads