Hmmm. I didn't know that the 628A could be debugged with the ICD2; it
can be programmed, but NOT debugged. It simply doesn't have the internal
debugging hardware.

Can somebody verify this?

--Bob
Tom wrote:
> I can second Dan's suggestion, Harold.  The ICD-2 error messages are
> cryptic at best and wrong at worst.
>
> Although I have not yet tried a '628A device, I did have a problem once
> when trying to work with an 18F452 in a PICDEM2 PLUS board in which the
> oscillator was not functioning.
>
> Hoping you get it fixed before the end of the year,
> Tom Fool
>
> At 03:26 PM 12/31/2003 -0800, you wrote:
>
>>Check the crystal type....I've gotten that error before when it's
>>incorrect.  Also check the proper device is selected as well.
>>
>>Both of these have caused me a few moments of serious soul searching
>>when connecting a new project and not getting a response.
>>
>>DD
>>
>>On Wed, 2003-12-31 at 15:06, Harold Hallikainen wrote:
>>
>>> I am having a problem with the ICD-2 and a 16F628A. I've tried two
>
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>



Tom wrote:
> I can second Dan's suggestion, Harold.  The ICD-2 error messages are
> cryptic at best and wrong at worst.
>
> Although I have not yet tried a '628A device, I did have a problem once
> when trying to work with an 18F452 in a PICDEM2 PLUS board in which the
> oscillator was not functioning.
>
> Hoping you get it fixed before the end of the year,
> Tom Fool
>
> At 03:26 PM 12/31/2003 -0800, you wrote:
>
>>Check the crystal type....I've gotten that error before when it's
>>incorrect.  Also check the proper device is selected as well.
>>
>>Both of these have caused me a few moments of serious soul searching
>>when connecting a new project and not getting a response.
>>
>>DD
>>
>>On Wed, 2003-12-31 at 15:06, Harold Hallikainen wrote:
>>
>>> I am having a problem with the ICD-2 and a 16F628A. I've tried two
>
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body