Why not use a small battery?  A lithium 3V will have more than enough
juice to power the Atmel (probably; I don't know where it stands in
relation to the PIC's power consumption), and then use the power
from the rails to power the LED's using a switching BJT.  A little bigger,
but I bet you could do it using SMT23 package for the transistors.

Mike H.

>Problem: When the motor is running, the AVR is not getting enough power, or
>possibly not stable enough power.
>I tried putting a 22uF condensator over the AtTiny, and that helped a bit
>but not enough. At idle speed it works, but at medium speed it starts to
>reset and att full speed it does not work at all.
>
>There is also a condensator that came in the car, which might be busted.
>
>What can i do? Do I just need a bigger condensator for the chip, or is
>there
>another problem I need to address?
>
>Thanks
>
>Magnus, Sweden

_________________________________________________________________
Tired of slow downloads? Compare online deals from your local high-speed
providers now.  https://broadband.msn.com

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.