Tim Hart wrote:
> I just bought an O'Socpe and some places on the web show it to be 100
> MHZ....and others show it to be 20 MHZ.  I did some math and I agree
> with 20 MHZ.  It's a Tek 465 and the dial goes to .05 uS.  If .1 us
> is 10 MHZ....then .05 should be 20 MHZ..  Am I missing something
> here?

Yes.  The frequency rating of a scope indicates how fast it responds to the
signal you are trying to watch (Y axis), not how fast the time base sweeps
(X axis).  The Tek 465 is indeed a 100MHz scope.  I've got one too.


*****************************************************************
Embed Inc, embedded system specialists in Littleton Massachusetts
(978) 742-9014, http://www.embedinc.com

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads