Great! I think Windows is good once you accept you have to sometimes out flank it... John Ferrell 6241 Phillippi Rd Julian NC 27283 Phone: (336)685-9606 johnferrell@earthlink.net http://DixieNC.US NSRCA 479 AMA 4190 W8CCW "My Competition is Not My Enemy" ----- Original Message ----- From: "Omer YALHI" To: Sent: Tuesday, December 23, 2003 9:37 AM Subject: Re: [PIC]: Warp13 error Unbelievable!!! I tried the USB-to-Serial converter, now everything is working fine! Thanks for the help Wouter and everyone else who took their time to answer my posts. Best regards, Omer Vmer Yalh} oyalhi@teksan.com.tr http://www.teksan.com.tr Tel: (212) 613-2200 Fax: (212) 544-7035 -----Original Message----- From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Wouter van Ooijen Sent: Tuesday, December 23, 2003 4:13 PM To: PICLIST@MITVMA.MIT.EDU Subject: Re: [PIC]: Warp13 error > Actually I have succesfully ran the software on my Pentium > 133 machine. The > unit is not working with the P4 2GHz machine that I have. I am trying > to find out, how to fix this, but so far zip. Hmmm I have had lots of problems with the serial port on my big PC (also a 2 GHz system), running XP, using any serial programmer and even with a few other serial thingies. But no problem whatsoever when I use an USB-to-serial converter with the same machine, so that is what I have user ever since. I had always suspected my hardware, but maybe there is something funny with a certain windows/hardware combination. Could you try an USB-to-serial converter? Wouter van Ooijen -- ------------------------------------------- Van Ooijen Technische Informatica: www.voti.nl consultancy, development, PICmicro products -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads