Or at least the 18F452 that came with it. I can still get some of the
programs to work, like the bttn.asm and a2d.asm, but when I reload the
18demo.hex, the display shows garbage. The chip sort of works, as in one
line of the display works ok, but the other is garbage. It seems I can still
get limited functionality out of it. When I put the pre-programmed 16F part
in, it works fine.

I think I must have tried to remove the 18F part from the PICDEM hardware
with the power still applied. Oops. Either that, or an errant ESD pulse.

Using the ICD2 and PICDEM2+ as a programmer is orders of magnitude faster
than the PICSTART+

I guess I'm going to have to be more careful as this project progresses.

Regards,

Cam Bremner  -  Canadian Coast Guard Technical Services
"There are 10 kinds of people in the world; those who understand binary and
those who don't."


-----Original Message-----
From: Jinx [mailto:joecolquitt@CLEAR.NET.NZ]
Sent: December 19, 2003 1:35 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [EE:] Watertight Enclosure


> liquefy and drip out of the connector at around 50 degrees C or so. Of
> course that shouldn't be a problem underwater, unless it's underwater
> in a hot tub ;-)

Hmmm, let's see....can I think of a reason to have a camera in a hot
tub........dum-di-dum-di-dum.........nah, beats me......

Oh, did I mention Vaseline not good around latex products ?

--
http://www.piclist.com hint: The list server can filter out subtopics (like
ads or off topics) for you. See http://www.piclist.com/#topics

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads