Mike hi,

Actually I have succesfully ran the software on my Pentium 133 machine.  =
The
unit is not working with the P4 2GHz machine that I have.  I am trying =
to
find out, how to fix this, but so far zip.

Any ideas are appriciated.
=20


=D6mer Yalh=FD
oyalhi@teksan.com.tr
http://www.teksan.com.tr
Tel: (212) 613-2200
Fax: (212) 544-7035

-----Original Message-----
From: pic microcontroller discussion list =
[mailto:PICLIST@MITVMA.MIT.EDU] On
Behalf Of Mike Hord
Sent: Monday, December 22, 2003 6:36 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [PIC]: Warp13 error

Actually, I've been using a Warp13a for several years and have found it =
to
be quite useful.

What version of Windows are you running this under?  Have you tried just
telling MPLab to use it as a PICStart+?

Also, do make sure that you have it connected to the serial port you say =
you
do, and that you have power to the unit.  Have you looked at the =
Newfound
Electronics website to see if there are any helpful tips there?

I expect you'll be hearing from Jim Robertson, the man behind the =
curtain,
before too long.  He's been very helpful to me on the one or two =
occasions
I've had trouble and posted here on the PICList.

I'd agree with Jan-Erik: don't knock it until it works and you have had =
a
chance to give it a fair shake.

Mike H.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads