We all have to "blow off a little steam" now & then! You just might have got a bad unit to start with. Keep us informed. I really doubt anyone who puts that much effort into their web site will not provide you the support you need. John Ferrell 6241 Phillippi Rd Julian NC 27283 Phone: (336)685-9606 johnferrell@earthlink.net http://DixieNC.US NSRCA 479 AMA 4190 W8CCW "My Competition is Not My Enemy" ----- Original Message ----- From: "Omer YALHI (Teksan)" To: Sent: Monday, December 22, 2003 2:49 PM Subject: Re: [PIC]: Warp13 error > Thanks for all the help. To sum it all up I will try the following: > > - Try a different power supply (or supplies) > > Things already tried: > > - Since I use the Port 1 and Port 2 on the computer all the time I know they > are working > - I know the cables (3 different ones) are working fine I use them all the > time > - Tried a different computer (2 computers total) and both have the same > problem > > Sorry for being critical, I did not know there were so many Warp fans. It's > just that, it is frustrating when things just don't work out of the box. > But if it is in fact the power supply (which is a possiblity) than, shame on > me to judge so quickly. > > Thanks and best regards, > > -- > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu > -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu