Thanks for the reply John,

here's my code for you (and anyone else) to take a look at.

I'm sure that it's pretty easy to spot, I'm just having a "brain-fade"
moment now....I'm really frustrated with with something that should be
easy to do.

Why does Hyperterminal ignore the CR?....I can get it to look alright if
I select "add cr/lf at end of line" within Hyperterminal, but I'm
EXPLICITLY SENDING THEM, I shouldn't HAVE to select that!!!!  Why are
they getting stripped out in the first place?



#include <p18f452.h>   /* for TRISB and PORTB declarations */
#include <usart.h>
#include <delays.h>
#include <stdlib.h>

#define         BS      0x08    //      Backspace
#define         HT      0x09    //      Horizontal tab
#define         LF      0x0A    //      Linefeed
#define         VT      0x0B    //      Vertical tab
#define         FF      0x0C    //      formfeed
#define         CR      0x0D    //      carrage return



void main (void)
{
OpenUSART       (USART_TX_INT_OFF &
                USART_RX_INT_OFF &
                USART_ASYNCH_MODE &
                USART_EIGHT_BIT &
                USART_CONT_RX &
                USART_BRGH_HIGH,
                0x40);

OpenTimer0      (TIMER_INT_ON &
                T0_16BIT &
                T0_SOURCE_INT &
                T0_EDGE_RISE &
                T0_PS_1_64);
WriteTimer0(56);
INTCONbits.GIEH = 0;          //enable interrupts
TRISC = 0x00;
counter = 0;


while (1)
{
        putcUSART (FF);
        putcUSART (LF);
        putcUSART (CR);
        putcUSART (LF);

        putrsUSART ("Hello1");

        putcUSART (LF);
        putcUSART (CR);
        putcUSART (LF);


        putrsUSART ("Hello2");

        putcUSART (LF);
        putcUSART (CR);
        putcUSART (LF);

        itoa (counter,buffer);
        putsUSART (buffer);

        putcUSART (LF);
        putcUSART (CR);
        putcUSART (LF);


        putsUSART (buffer2);
        counter++;

        Delay10KTCYx(0xff);
        }
}



On Sat, 2003-12-20 at 23:38, John De Villiers wrote:
> On Sun, 2003-12-21 at 01:50, Dan Devine wrote:
> > Hello...
> >         12345
> >              Hello again....
> >
> i think you gotta escape your cr+lf with a a ^[  ( char d'27' ) first.
>
> John
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body