Wouter

Theres a UK company called Rapid electronics that I use a fair bit who sell
these PCB shears.

They do two types - an 8 inch shear (203mm) for 164 ukp or a 12 inch shear
(305mm) for 212 ukp (+ vat).

Both are capable of up to 1.6mm thickness PCB.

If you get desperate then you might want to try them.

www.rapidelectronics.co.uk

Cheers

Dom
----- Original Message -----
From: "Wouter van Ooijen" <wouter@VOTI.NL>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Sunday, December 21, 2003 7:17 AM
Subject: Re: [EE:] cutting PCBs


> > Depending on how large you need, a shear isn't really
> > terribly expensive.
> > I don't know what that sort of thing might cost in
> > Amersfoort, but on this
> > side of the pond a shear capable of cutting boards perhaps
> > 200 mm wide or so
> > only costs a little over 100 euro.  As you go wider, though,
> > they do go up
> > in cost pretty steeply.
>
> 200mm is OK, but where can I buy these things? The supplliers I know
> don't seem to offer these things.
>
> Wouter van Ooijen
>
> -- -------------------------------------------
> Van Ooijen Technische Informatica: www.voti.nl
> consultancy, development, PICmicro products
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body