huh/ ----- Original Message ----- From: "James Newton, webhost" To: Sent: Friday, December 19, 2003 3:47 PM Subject: [BUY:] LCD help > Bill: Sorry, I'm too busy... > Any PICList member: Please respond to Bill directly if you can help. > > --- > James Newton, webhost piclist.com (former Admin #3) > jamesnewton@piclist.com 1-619-652-0593 fax:1-208-279-8767 > PIC/PICList FAQ: http://www.piclist.com or .org > > -----Original Message----- > From: Bill Davis [mailto:wdavis@texoma.net] > Sent: Wednesday, December 17, 2003 11:37 AM > To: webmaster@piclist.com > Subject: I need someone to help me with: > > > I'm using pic16f877 to drive steppers motors. So far I got programmed to > controled the motor to do what I need. right now I'm getting into LCDs. > Using Seiko L203200J000, I'm already confuse as to pin numbering(14 pin). > I'm thinking the one row will number 1, 3, 5, etc. and the other will number > 2, 4, 6, etc. then I have several smaller pins marked T1, T2, and T5. I'm > not clear as to what these are for. I'm using An587 documentation. > I feel like I may need help with the programming on this. I liked to stay > with assembly. > I like to take this as far as I can. If I get stuck what are the rates for > help on this. > when you respond, Please use LCD help in the subject line. > thanks > bill davis > > -- > http://www.piclist.com hint: The list server can filter out subtopics > (like ads or off topics) for you. See http://www.piclist.com/#topics > --- Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.551 / Virus Database: 343 - Release Date: 12/11/2003 -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics