Bill: Sorry, I'm too busy...
Any PICList member: Please respond to Bill directly if you can help.

---
James Newton, webhost piclist.com (former Admin #3)
jamesnewton@piclist.com 1-619-652-0593 fax:1-208-279-8767
PIC/PICList FAQ: http://www.piclist.com or .org

-----Original Message-----
From: Bill Davis [mailto:wdavis@texoma.net]
Sent: Wednesday, December 17, 2003 11:37 AM
To: webmaster@piclist.com
Subject: I need someone to help me with:


I'm using pic16f877 to drive steppers motors. So far I got programmed to
controled the motor to do what I need. right now I'm getting into LCDs.
Using Seiko L203200J000, I'm already confuse as to pin numbering(14 pin).
I'm thinking the one row will number 1, 3, 5, etc. and the other will number
2, 4, 6, etc. then I have several smaller pins marked T1, T2, and T5. I'm
not clear as to what these are for. I'm using An587 documentation.
I feel like I may need help with the programming on this. I liked to stay
with assembly.
I like to take this as far as I can. If I get stuck what are the rates for
help on this.
when you respond, Please use LCD help in the subject line.
thanks
bill  davis

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics