DOH! I spoke to NEC awhile back, and they told me they were discontinuing the 16DO's soon too. They are going to switch to the CG-34's only...which is identical to the 16DO's except 3.3v supply only. That could be part of rotomotions problem also. Anyway....Here is another supplier. Bravo Electronics http://www.bravoelectro.com/html/tkse03.html Hope this helps! - Ted -----Original Message----- From: D Yates [mailto:piclist@NERDULATOR.NET] Sent: Friday, December 19, 2003 12:11 PM To: PICLIST@MITVMA.MIT.EDU Subject: Re: ] Gyro Supplier ----- Original Message ----- From: "Ted Larson" To: Sent: Friday, December 19, 2003 10:44 AM Subject: Re: ] Gyro Supplier > You can get the Tokin CG16DO's from here in small qty: > http://www.rotomotion.com > > Hope this helps, > > - Ted > Unfortunately, they no longer supply gyros! Their response to inquiry: Derek: Thanks for the inquiry. Due to limited gyro supplies, we had to discontinue offering gyro-only sales. I do have some sets of used sensor boards available (from unit upgrades) if you are interested. These are analog-ouput (sensors are filtered and amplified to provide 0-5V, ~2.5V 0's) boards - you can pull the gyros (carefully) if you desire other circuitry. Z-board (2 accelerometers, 1 gyroscope): $70.00 XY-board (2 accelerometers, 2 gyroscopes): $140.00 Best Regards, Dennis D'Annunzio (tel-direct) 843-209-6941 -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics