Hello,

I've sampled some 18F458's from MC, but received the Extended Temperature
version (E/P) instead of the normal Industrial (I/P). According to Fig. 27-1
and 27-2 in the datasheet, the E/P part is limited to 25Mhz where the I/P
part runs up to 40Mhz.

Question:
Is it safe to assume that running the E/P part at 40Mhz is ok as long as the
temperature-range of the I/P part is obeyed?

Thanks!

Marcel

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics