You have to follow the opportunities. Until you start spec'ing the hardware, what ever the boss says is what you use. John Ferrell 6241 Phillippi Rd Julian NC 27283 Phone: (336)685-9606 johnferrell@earthlink.net http://home.sprintmail.com/~johnferrell/dixiecompetitionproducts/ NSRCA 479 AMA 4190 W8CCW "My Competition is Not My Enemy" ----- Original Message ----- From: "Andre Abelian" To: Sent: Thursday, December 18, 2003 3:06 PM Subject: [OT]: TI MSP430F149 vs PIC > HI to all engineer, > > Suppose one of you worked on pic over 7 years and got > Bunch of projects done asm or C now there is contract > Job offer instead of using pic is MSP430F149 by TI how > Would you respond are you ready to work with TI micro > Or you are beginner for TI micro and you shouldn't > Even go close to it. After searching for Job 2 months > I couldn't find any company that uses pic micro. > How would you know if TI part is better then pic > Should I start looking at Ti, or cypress micro or > Atmel. My question is how would you manage all this when it comes > To look for new job? Most companies are saying yaa you > Have good experience on pic but sorry we do not use pic. > I look at TI micro it has 2 hardware UART, JTAG etc > This guys are not even using an emulator JTAG does the > Job. I do not know any feedback? > > Andre > > -- > http://www.piclist.com hint: The list server can filter out subtopics > (like ads or off topics) for you. See http://www.piclist.com/#topics > -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics