Thanks.  After looking more closely I found some cast alumininum watertight
enclosures from Hammond at Digikey.  Not cheap  I'll also check Grainger to
see what they have.  I also need recommendations for outdoor able 2 - 8 pin
connectors if anyone has any ideas.

Thanks,
Nick


----- Original Message -----
From: <SavanaPics@AOL.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Thursday, December 18, 2003 7:57 PM
Subject: Re: [PICLIST] [EE:] Watertight Enclosure


> if you have to have it where it can be opened, you may want to try a local
> eletrical supply house. We used them at Georgia Pacific when I worked
there and
> I think we got them from either Graybar Electric, or Grainger. (
> http://www.grainger.com ) but they are not cheap. The ones I used from
Home Depot were less
> than 10 or 15.00 but did not have instant access.
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads