Matt:

I do board design for a lot of different companies and maby I can help.
Please contact
me off list for further info.  I have most of the PIC's and Motorola
controllers is my
librarys along with a others too numerous to mention.

CR

>
>
> My board will be about 1.25" by 3.5", 2-layer.  It will consist of an MCU,
> several other ICs (all SMT), a few pin headers and a handful of smaller
> components.  The board itself is bigger than it needs to be due to some
> mechanical requirements - the circuit itself is fairly simple.
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body