Wouter van Ooijen wrote:

>>At last I have found that BOTH, 628 AND 628A CAN BE PROGRAM WITH FPP.

> So it happens that it works (parially?),

No, it works fully. I can erase and reprogram both chips.

> not by design but by accident.

I would be prefer to salute to the wisdom of a astute designer for
implementing the right commands.

> Then what are you complaining about?

I am not sure to understand what you mean here.
But I have to tell you, when I first post my question, I was hoping that
you Wouter and others that made programming software for these chips
would see this as a challenge and offer leads. If not, at the least be
interested in the solution. Well I was wrong.

I understand that nobody HAS to offer help. But I wonder why someone
your caliber would waste his time giving the "RTFM", "Search the last
five year archives" or "Buy a real controller" type of answer when there
is an intelligent solution at hand?

When this sooo useful and dirt cheap setup of mine comes to its limit I
may look into other programmers like yours. But once again its life has
been extended.

Gaston Gagnon

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body