Wouter

Yes I am sure.

The problem is when I draw a wire between to nets eagle ask me to what net
add the new wire, it become the same net as I select it. later, I cant
delete it but can only delete the *whole* net.

Tal

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Wouter van Ooijen
Sent: Sunday, December 14, 2003 11:12 AM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [EE]: Eagle HELP! URGENT!


> There is no way to erase it or even see it in schematic.

I re-read your post: are you sure you have drawn a WIRE on the PCB? When
I do that I can delete it (X-button). For a trace (route command) you
must use ripup.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics