> Wouter & D. Jay Newman
>
> Sorry guys, the answer is not what you said.
> It's a bug or other problem. or maybe an illegal command that I am doing,
> that's work one way only.
> There is no way to erase it or even see it in schematic.
> Odd..

Tal:

Unless you are describing something quite different than what I am
understanding, then the "ripup" command is what you want.

The nets on the schematic view do not directly correspond to the wires
in the board view.

If you've used autorouting, you use "ripup" to remove one or more physical
routes (you should use the "route" command to lay down a trace in the
board view). I use the GUI tools to do it (click on the "ripup" tool and
then on the route I want to ripup).
--
D. Jay Newman           !
jay@sprucegrove.com     ! Xander: Giles, don't make cave-slayer unhappy.
http://enerd.ws/robots/ !

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads