> Hello group,
>
> (This time with the proper subject-tag...)
>
> I saw some examples on the web parallelling PIC-pins to increase maximum
> source/sink current. Is this allowed? Is it necessary to include a small
> resistor on each pin to compensate differences in pin-specifications?
>
> Marcel

I would consider this acceptable, if you are sure both pins change state at
the exact same instant (i.e.: via a single write to the port).

I would not bother with the resistors. The FET outputs will share current
nicely, unlike bipolar transistors.

Bob Ammerman
RAm Systems

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads