> I don't know why the
> disassembler picks those symbols, but you'll notice
> you're in the correct bank with the bsf/bcf
> instructions that surround it.  (Those registers are
> at the same offset in different banks.)

I'll answer my own question.  It's because there are
only 7 bits for the register in the encoded movwf
instruction.  Blind disassembly will thus always have
to choose the symbol in bank 0.


__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads