I'd like to see the schematic of a 4016 based fader. Carey ----- Original Message ----- From: "Rick C." To: Sent: Wednesday, December 10, 2003 8:26 AM Subject: Re: [EE:] Audio Switch IC's? > I use a cheap, easy to get, CD4016 or 4066. It has four switches that can be > controlled by a logic level. Clean switching and ~50db cutoff. I use it to > switch audio circuits in broadcast equipment. The 4016 can actually fade up or > down. Will work on a single 5 volt supply. If anyone's interested, I can post a > schematic. Actually, a j-fet will do the same thing. > Rick - Chief Engineer, WTRM-FM > > "Hulatt, Jon" wrote: > > > Hi, > > > > Does anyone know of a chip that can switch stereo line-level audio signals? > > I want my pic circuit to be able to switch between two stereo sources, with > > one output to an amplifier, without nasty crackles or pops. > > > > Thanks > > > > Jon > > -- > http://www.piclist.com hint: The PICList is archived three different > ways. See http://www.piclist.com/#archives for details. > > -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.