stop whining! if you dont like it turn off the 'other' list function .......see the instructions below blatantly copied from the piclist website. One special channel that should be mentioned is the Other: channel. This is were posts that don't have the correct topic tags are sent. If you are seeing untagged post, you have the Other: channel enabled. You can turn off the Other: channel by sending SET PICLIST TOPICS: -Other to LISTSERV@MITVMA.MIT.EDU mailto:LISTSERV@MITVMA.MIT.EDU?body=SET%20PICLIST%20TOPICS:%20-other :-P~~~~~ JJ -----Original Message----- From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Leonard Gabrielson Sent: Tuesday, 9 December 2003 1:06 AM To: PICLIST@MITVMA.MIT.EDU Subject: Re: ] polyfuse symbol put a proper header on these dumb emails. not everybody wants them! ----- Original Message ----- From: "Wouter van Ooijen" To: Sent: Monday, December 08, 2003 4:44 AM Subject: Re: ] polyfuse symbol > > Fairly sure it's:- > > > > | > > o > > / > > \ > > / > > o > > | > > > > Where the /,\,/ are a wavy line. > > Isn't that a symbol for a normal (meling, non-recovering) fuse? > > Wouter van Ooijen > > -- ------------------------------------------- > Van Ooijen Technische Informatica: www.voti.nl > consultancy, development, PICmicro products > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads --- Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.548 / Virus Database: 341 - Release Date: 12/5/2003 -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads