"Jan-Erik Soderholm XA (TN/PAC)" <jan-
erik.xa.soderholm@ERICSSON.COM> said:

> > I assume the current/voltage will take the path of
least
> > resistance and go through the battery pack to gnd.
>
> That's is the key here. The ADC input is measuring
*voltage* and
> you can not *force* a significant current into that pin
(without
> putting a too high voltage on the pin, but your voltage
divider
> will take care of that, right ?) Nothing magical, just
ohms law.
>
>
> > I thought I would ask since I do not want to blow a
pin
> > on the pic testing this.
>
> You can only do that by putting a to high *voltage* on
the pin.
> Just don't do that and everything should be fine...
>
> Jan-Erik.
>

OK, great.
Thanks again!
             Kevin

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads