Consider a good layer of roof-tar for openings and joints if they are
exposed.
Also check that they are of same metal-type.

Ling SM

> The thing about salt is that it's so invasive. Moisture on its own
> is fairly easy to keep out, although it's probably impractical to
> avoid humidity. This is an internal fitting in an underwater
> camera housing so its working life will be in salt-laden water
> or air. The person who soldered it up before me just used heat-
> shrink and exposed metal areas have suffered the most,
> particularly corrosion creeping up under the wire's sheathing

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body