Sure, Just BCF the GIE flag. Bob Ammerman RAm Systems ----- Original Message ----- From: "Marcel van Lieshout" To: Sent: Friday, December 05, 2003 4:26 PM Subject: [PIC:] Is it possible to delay interruptprocessing? > Hello group, > > I have a routine as part of my main loop which does some math on 32bit > integers. The integervalues are stored into the variables by the > interrupt-routine. It can happen, of course, that my main routine is > fetching the values while the interruptroutine is storing new values into > the variables. This overlap would be at least 8 cycles (fetch four > bytes/store four bytes). Is it possible to hold off interrupt processing > for, let's say, a dozen cycles? Are there any other failproof solutions? > > Regards, > > Marcel van Lieshout > > -- > http://www.piclist.com hint: The PICList is archived three different > ways. See http://www.piclist.com/#archives for details. -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.