> My new programmer the (Warp 13a) lets me set all my configuration bits
> before I flash the code to the pic, but I also have the configuration bits
> set in my asm code.  Which of the settings (the configurations I
> made in my
> programmer or the __CONFIG line in my asm code) actually take
> effect on the
> PIC when programmed?

        When you first load the hex file the settings are imported from the hex
file. What you change after that is what gets into the chip. TTYL

----------------------------------
Herbert's PIC Stuff:
http://repatch.dyndns.org:8383/pic_stuff/

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics