----- Original Message -----
From: "Brian Clewer" <brianclewer@MISTRAL.CO.UK>

> On 03 December 2003 17:17, D Yates wrote:
>
> > I recently picked up a stepper motor with 9 wires, but can't find any
> > documentation about a 9-wire stepper motor!  An attack with the
ohm-meter
> > revealed 3 wires (a,b,c - see below) with a 2.00 ohm resistance
> > between each
> > pair of wires, and the rest have either infinite resistance or 5-10
Mohms
> > resistance.  Any ideas what's going on here or how to control it?
> >
> > a -> b = 2.00 ohms
> > a -> c = 2.00 ohms
> > b -> c = 2.00 ohms
> >
> > If it helps, the wire colors are:
> >
> > a: brown
> > b: yellow
> > c: orange
> >
> > and the rest are black, red, purple, blue, white, and green.



> Take a look at http://www.iwac.se/adbiotech/ADB_IO/Application_Notes/AN-9/
>
> Is there any useful info there?
> Brian.

Lots of useful information, but unfortunately not much I didn't already know
: (

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads