My apologies to all. I live in Springfield, Ma. I don't want to cross the pond to fix a product. regards Wally >From: Denny Esterline >Reply-To: pic microcontroller discussion list >To: PICLIST@MITVMA.MIT.EDU >Subject: Re: [BUY:]A Pair of Hands >Date: Sun, 30 Nov 2003 15:14:13 -0500 > > >> Hi All > >> I need someone to swap out a couple of 509as > >> Applicant should be in the proximity of Sevenoaks, Kent > >> regards > >> Wally Barnacle > > > > > >Mmmm, after the fourth posting of the same message in just over 1 hour, > >sounds like you're really desperate just to swap a couple of chips? Ok, >Ill > >do them for #50.00 each. Of course you could try doing this yourself, it >is > >quite easy. > > > >The best and easiest way if you don't know about electronics is to cut >the > >legs close to the chip with a thin sharp knife if the part is surface >mount > >or with a pair of cutters if the part is through hole. Then just lift >out > >the legs with a soldering iron and desolder the pads / holes afterwards. > > > >Then just solder the new part in. > > > >Brian. > >Maybe desperate, maybe just new to the list, considering all the tags are >slightly different. > >Maybe he doesn't know about electronics, maybe he's just a long ways >away... > >I'll do it for free. Just cover my travel expenses (I live in Michigan, >USA) ;-) > >-Denny > >-- >http://www.piclist.com hint: The PICList is archived three different >ways. See http://www.piclist.com/#archives for details. _________________________________________________________________ Groove on the latest from the hot new rock groups! Get downloads, videos, and more here. http://special.msn.com/entertainment/wiredformusic.armx -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.